At Attachment Service Centers, we’ve spent more than a decade rebuilding and repairing breakers and compactors. With more than 2,000 successful builds completed and counting, that adds up to tens of thousands of hours diagnosing failures, solving problems, and helping...
ASC is proud to be a trusted provider of parts and service and repairs for Rammer and NPK hydraulic hammers and breakers! NPK Construction Equipment hydraulic hammers are a line of high-performance demolition attachments designed for construction, excavation, and...
My hammer was fine a week ago, now it’s weak/slow/quit/erratic! We hear this every spring and fall, and regularly in between. The most likely culprit is that the nitrogen head charge on your breaker has been affected by a large swing in temperature. Many operators...
An important reminder when getting ready to use your hydraulic hammer: Check your bolt torques as per manufacturer instructions. This will help prevent damaged side plates and premature failure of bolts. Tie rods that are allowed to loosen up will cause breaker body...
Flow and pressure testing is a must! Flow testing your machine prior to putting on a new breaker or compactor, will maximize productivity and ensure proper hammer performance. Not setting your machine for proper flow and pressures could cause premature failure of the...
Remember: Always use the proper chisel paste for your hammers! Using the improper grease will result in premature wearing, scoring and galling to the bushings and bit. Improper grease heats up and runs down the bit, creating the effect that your seals are leaking....
